View PE-5163X_453780.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

GENERAL PURPOSE TRANSFORMERS
2 Watt Pulse, Electrostatically Shielded, 500 mW Pulse, RF Pulse, and Control Transformers
Wide range of inductors and turns ratios Suitable for a variety of applications High flux density capability Available in through hole and surface mount packages
Electrical Specifications @ 25C -- Operating Temperature 0C to 70C
Part Number Turns Ratio (5%) Primary Sine Wave OCL (mH MIN) 0.5 1.3 20.0 1.0 1.3 5.0 0.2 0.2 1.2 10.0 1.0 1.0 10.0 Primary ETConstant (V-s MIN) 46 84 250 70 91 196 53 91 77 224 77 77 252 Rise Time (ns MAX) PRI/SEC* Cww (pF MAX) Leakage Inductance PRI/SEC (H MAX) 1.7 3.0 10.5 2.2 3.2 13.0 5.7 3.1 2.8 22.0 3.1 2.5 16.7 DCR Primary ( MAX) DCR DCR Schematic/ Hi-Pot Secondary Tertiary Package (Vrms) ( MAX) ( MAX) Style
2 WATT PULSE TRANSFORMERS
PE-2227X PE-2228X PE-2243X PE-4290X PE-2229X PE-2231X PE-2671X PE-5154X PE-5156X PE-5160X PE-5159X PE-5158X PE-5163X 1:1 1:1 1:1 1:2 1:1:1 1:1:1 4:1:4 1:1 1:1 1:1 1:1:1 1CT:1CT 1CT:1CT 8 30 80 50 30 70 50 17 19 200 19 21 60 26 40 87 36 38 35 17 2.7 4.1 4.5 5.6 3.2 2.5 1.3 3.6 27.0 1.4 3.6 8.8 1.2 1.6 1.1 11.0 1.1 1.8 14.0 1.4 3.8 28.0 3.1 3.8 9.6 0.2 1.6 1.1 11.0 1.1 1.8 14.0 -- -- -- -- 3.9 11.0 1.3 -- -- -- 1.2 -- -- 700 700 700 700 700 700 700 700 700 700 700 700 700 TH1 TH1 TH1 TH1 TH4 TH4 TH4 TH2 TH2 TH2 TH5 TH3 TH3
ELECTROSTATICALLY SHIELDED TRANSFORMERS
*NOTE: for Electrostatically Shielded Transformers, C ww is measured with shield corrected to guard voltage.
Schematics
TH1 TH2 TH3 TH4 TH5
7
8
7
8
2
46
8
5
67
8
5
67
8
1
2 WINDING
2
1
24
2 WINDING WITH SHIELD
1
5
7
1
2
3 WINDING
1
2
4
2 WINDING WITH CT AND SHIELD
3 WINDING WITH SHIELD
U.S: 858 674 8100 * U.K: 44 1483 401 700 * France: 33 3 84 35 04 04 * Singapore: 65 287 8998 * Taiwan: 886 2 2698 0228 * http://www.pulseeng.com
1
G008.A (2/00)
GENERAL PURPOSE TRANSFORMERS
500 mW Pulse
Electrical Specifications @ 25C -- Operating Temperature 0C to 70C
Part Number Turns Ratio (5%) Primary Sine Wave OCL (mH MIN) 5.0 2.0 0.5 0.2 0.05 0.5 2.0 0.5 0.2 2.0 0.5 1.2 .085 -- -- 0.5 0.2 0.5 0.5 0.2 0.5 .085 .085 Primary ETConstant (V-s MIN) 25.0 16.0 8.5 5.0 5.2 8.5 16.0 8.5 5.0 16.0 8.5 10.0 2.5 25.0 16.0 5.0 4.0 5.0 5.0 4.0 5.0 2.5 2.5 Rise Time (ns MAX) PRI/SEC Cww (pF MAX) Leakage DCR Inductance Primary PRI/SEC (H MAX) ( MAX) 1.3 0.8 0.4 0.3 0.5 1.1 0.8 0.4 0.3 1.8 1.2 0.8 0.2 1.3 1.8 0.3 0.2 0.3 0.3 0.2 0.7 0.2 0.2 3.9 2.5 1.3 0.9 1.3 1.3 2.5 1.3 0.9 2.5 1.4 0.8 0.20 3.9 2.5 0.9 0.7 0.9 0.9 0.7 0.9 0.20 0.20 DCR DCR Hi Pot Schematic Secondary Tertiary Package Vrms ( MAX) ( MAX) Style
500 MW PULSE TRANSFORMERS
PE-5760 1:1:1 PE-5761 1:1:1 PE-5762 1:1:1 PE-5763 1:1:1 PE-5764 1:1:1 PE-5769 2:1:1 PE-8270 1CT:1CT PE-8271 1CT:1CT PE-8272 1CT:1CT PE-8276 2CT:1CT PE-8277 2CT:1CT PE-65502 1.25:1 23Z81 1:1:1 dual 66Z1203 1:1:1 66Z1212 2:1:1 PE-5762M 1:1:1 PE-5763M 1:1:1 PE-5769M 2:1:1 PE-8271M 1CT:1CT PE-8272M 1CT:1CT PE-8277M 2CT:1CT 23Z81SM 1:1:1 dual 23Z87SM 1:1:1 10.5 8.2 5.3 4.2 5.6 5.6 -- -- 4.2 -- -- 10.0 3.0 10.5 11.0 4.2 3.5 4.2 4.2 3.5 6.0 3.0 3.0 70 37 32 18 18 11 37 32 18 19 12 35 9.5 60 19 25 18 18 18 14 18 9.5 9.5 3.9 2.5 1.3 0.9 1.3 0.7 2.5 1.3 0.9 1.4 0.8 0.7 -- 3.9 1.4 0.9 0.7 0.45 0.9 0.7 0.45 -- -- 3.9 2.5 1.3 0.9 1.3 0.7 -- -- -- -- -- -- -- 3.9 1.4 0.9 0.7 0.45 -- -- -- -- -- 500 500 500 500 500 500 700 500 700 500 700 1500 500 500 500 1500 1500 1500 1500 1500 1500 500 500 TH6 TH6 TH6 TH6 TH6 TH6 TH7 TH7 TH7 TH7 TH7 TH8 TH9 TH6 TH6 SM1 SM1 SM1 SM2 SM2 SM2 SM3 SM2
NOTE: To order Tape & Reel packaging for surface mount parts, add the suffix "T" to the part number. (Example: PE-5769MT). The "T" will appear on all paper work, but will not be marked on parts.
Schematics
TH8
5
TH6
3
45
6
TH7
6
4
2
6
TH9
2
13 3
12 6
97
8
1
2 3 WINDING
1
3
5
1 2 WINDING 5 4
2
1
14
5 DUAL
10
2 WINDING WITH CT
SM1
2
53
4
SM2
6
SM3
2
13 3
12 6
97
8
1
6 3 WINDING
1
2
3
1
14
5 DUAL
10
2 WINDING WITH CT
U.S: 858 674 8100 WORLD TRADE DRIVE,France: DIEGO, CALIFORNIA 92128 * TEL 619-674-8100 *2FAX 619-674-8262 * http:// 12220 * U.K: 44 1483 401 700 * SAN 33 3 84 35 04 04 * Singapore: 65 287 8998 * Taiwan: 886 2698 0228 * http://www.pulseeng.com
G008.A (2/00)
2
GENERAL PURPOSE TRANSFORMERS
2 Watt Pulse, Electrostatically Shielded, and 500 mW Pulse Transformers
Mechanicals
TH1 to TH5
TH1: 2 WINDING TH2/TH4: 2 WINDING WITH SHIELD OR 3 WINDING .100 TYP 2,54 .650 MAX 16,51 7 5 1 PE-XXXXX
DATE CODE CTRY ORIGIN
TH3/TH5: 2 WINDING WITH CT AND SHIELD OR 3 WINDING WITH SHIELD .300 7,62 .100 TYP 2,54 .300 7,62 .500 12,70
8 6 4 2
.443 MAX 11,25 .500 12,70 .400 MAX 10,16 .025 MIN .500 MIN 0,64 12,70
.300 7,62 .500 12,70 BOTTOM VIEWS
Part Number TH1*/TH2 TH3/TH5 TH4 *Except PE-4290X Weight (Grams) 3.9 4.2 4.0 4.1
.300 7,62
Tube 45 45 45 45 inches Dimensions: mm Unless otherwise specified, all tolerances are .010 0,25
#22 AWG SOLDERABLE LEADS
TH6 to TH8
.500 MAX 12,70
5 3 6 PE-XXXXX 4 DATE CODE 1 COUNTRY OF ORIGIN 2
TH8: 2 WINDING .400 10,16 .200 5,08
TH6/TH7: 3 WINDING OR 2 WINDING WITH CT .400 10,16 .200 5,08 .100 2,54
.350 MAX 8,89
BOTTOM VIEWS
.500 MIN 12,70 .250 MAX 6,35 .070 MIN 1,78 #24 AWG SOLDERABLE LEADS
Part Number TH6* TH7 (PE-8270, PE-8271, PE-8272) TH7 (PE-8276,PE-8277) TH8 Weight (Grams) 1.3 1.4 1.3 1.1 Tube 60/67* 60 60 60 inches Dimensions: mm Unless otherwise specified, all tolerances are .010 0,25
*NOTE: TH6 (66Z1203/66Z1212)
TH9
23Z81 Country of Origin .018 TYP 0,46
Date Code
.800 20,32
.285 7,24
Weight ................... 1.2 grams Tube ........................... 28/tube inches Dimensions: mm
.200 5,08 .015 MIN 0,38 .100 TYP 2,54 .600 .010 15,24 0,25 .125 .020 3,18 .0,51
.250 MAX 6,35
.340 .020 8,64 0,51
Unless otherwise specified, all tolerances are .005 0,13
U.S: 858 674 8100 * U.K: 44 1483 401 700 * France: 33 3 84 35 04 04 * Singapore: 65 287 8998 * Taiwan: 886 2 2698 0228 * http://www.pulseeng.com
3
G008.A (2/00)
GENERAL PURPOSE TRANSFORMERS
2 Watt Pulse, Electrostatically Shielded, and 500 mW Pulse Transformers
Mechanicals
SM1 & SM2 (except 23Z87SM)
.025 0,64 .300 7,62 .290 7,37 .430 10,92
23Z87SM Date Code Country of Origin
.070 1,78
23Z87SM
.018 TYP 0,46
.030 0,76
.070 1,78
.260 .400 6,60 10,16
.415 300 10,54 7,62
PE-XXXXSM
DATE CODE CNTRY OF ORIGIN
.200 5,08
.100 TYP 2,54
.200 5,08
.100 2,54
.100 2,54
.050 TYP 1,27
SUGGESTED PAD LAYOUT
.230 5,84 .265 6,73
SUGGESTED PAD LAYOUT
.010/.015 0,25/0,38
.004/0,10 6 SURFACES
0-8
.215 5,46
0-8 .020 MIN 0,51 .360 9,14
.018/.020 TYP 0,46/0,51
.040 1,02
.005/.010 0,13/0,25
.100 2,54
.050 TYP 1,27
Part SM1 SM2: PE-8271M PE-8272M PE-8277M Except 23Z87SM
Weight (Grams) 0.6 0.7 0.7 0.6 0.5
Tape & Reel 500 500 500 500 750
Tube 65 60 65 65 100 Unless otherwise specified, all tolerances are
inches Dimensions: mm Unless otherwise specified, .010 all tolerances are 0,25
inches Dimensions: mm .005 0,13
SM3
.100 2,54
.070 1,78
.030 0,76 .260 .400 6,60 10,16
23Z81SM
Date Code Country of Origin
.300 7,62
.050 TYP 1,27
.018 TYP 0,46 .450 11,43
SUGGESTED PAD LAYOUT
.265 6,73
.215 5,46
0-8 .020 MIN 0,51 .360 9,14
Weight ................... 0.9 grams Tube .......................... 50/tube Tape & Reel .............. 750/reel inches Dimensions: mm Unless otherwise specified, all tolerances are .005 0,13
.005/.010 0,13/0,25
.050 TYP 1,27 .300 7,62
U.S: 858 674 8100 WORLD TRADE DRIVE,France: DIEGO, CALIFORNIA 92128 * TEL 619-674-8100 *2FAX 619-674-8262 * http:// 12220 * U.K: 44 1483 401 700 * SAN 33 3 84 35 04 04 * Singapore: 65 287 8998 * Taiwan: 886 2698 0228 * http://www.pulseeng.com
G008.A (2/00)
4
GENERAL PURPOSE TRANSFORMERS
RF Pulse
Designed for use in 50 Wideband IC applications Characterized for Pulse and wide band use at 50 impedance Standard 6-pin DIP package or ThinSet surface mount package
Electrical Specifications @ 25C -- Operating Temperature 0C to 70C
Part Number Turns Ratio (5%) Primary Primary PRI/SEC PRI/SEC Pulse ETLeakage Cww Inductance Constant Inductance (H MIN) (v-S MIN) (pF MAX) (H MAX) Primary Secondary DCR DCR ( MAX) ( MAX) Bandwidth Schematic/ for -3 dB Loss Package Low Freq High Freq Style (MHz) (MHz)
SURFACE MOUNT*
PE-65457 PE-65459 23Z247SMD 1CT:1CT 1CT:2CT 1:1CT 1:1 1CT:1CT 1:2CT 1: 2CT 1:4CT 80 40 80 40 40 25 40 10 2.5 2.0 2.5 2.5 2.5 2.0 2.5 1.25 15 15 15 12 15 15 18 10 0.18 0.14 0.18 0.15 0.18 0.14 0.20 0.10 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.30 0.20 0.20 0.20 0.30 0.30 0.60 0.05 0.05 0.05 0.05 0.05 0.10 0.05 0.20 90 110 90 110 90 110 80 60 A / SMT1 A / SMT1 B / SMT2 C / TH10 D / TH10 B / TH10 B / TH10 B / TH10
THROUGH HOLE
PE-62245A PE-62246A PE-62250A PE-62252A PE-62254A
*NOTE: To order Tape & Reel packaging for surface mount parts, add the suffix "T" to the part number. (Example: PE-65457T). The "T" will appear on all paper work, but will not be marked on parts.
Schematics
A B C D
123
654
6
4
654
654
1
3
1
3
123
U.S: 858 674 8100 * U.K: 44 1483 401 700 * France: 33 3 84 35 04 04 * Singapore: 65 287 8998 * Taiwan: 886 2 2698 0228 * http://www.pulseeng.com
5
G008.A (2/00)
GENERAL PURPOSE TRANSFORMERS
RF Pulse
Mechanicals
SMT 1
.340 MAX 8,64 .285 7,24 .060 1,52 .050 1,27
.200 5,08 .100 2,54 .285 7,24 SUGGESTED PAD LAYOUT
6
1 .100
2,54
PE-XXXXX
5 4
DATE CODE COUNTRY OF ORIGIN
.260 MAX 6,60 .200 5,08
2 3
PE-65457 PE-65459 Weight ................... 0.2 grams ........ 0.1 grams Tube ........................... 60/tube ............ 60/tube Tape & Reel ............ 1500/reel ......... 1500/reel
.098 MAX 2,50 .005/0,13 6 Surfaces
Dimensions: inches mm Unless otherwise specified, all tolerances are .010 0,25
SMT 2
.030 0,76 .018 TYP 0,46 .260 .400 6,60 10,16 23Z247SMD Date Code Country of Origin .265 .360 6,73 9,14 .200 5,08 .100 TYP 2,54 .080 2,03
TH10
6 5 4
PE-XXXXX
DATE CODE COUNTRY OF ORIGIN
.275 MAX 6,99
1
2 3 .300 MAX 7,62
.100 TYP 2,54 .300 7,62
SUGGESTED PAD LAYOUT .245 MAX 6,22
.210 5,33
0-8 .005/.010 0,13/0,25 .100 2,54 .200 5,08
.130 3,30 .300 MIN 7,62 .350 MAX 8,89
Weight ................... 0.6 grams Tube ........................... 65/tube Dimensions: inches mm Unless otherwise specified, all tolerances are
.200 5,08
.020 TYP 0,51
Weight ................... 0.5 grams Tube ........................... 76/tube Tape & Reel .............. 750/reel Dimensions: inches mm Unless otherwise specified, all tolerances are .005 0,13
.010 0,25
U.S: 858 674 8100 WORLD TRADE DRIVE,France: DIEGO, CALIFORNIA 92128 * TEL 619-674-8100 *2FAX 619-674-8262 * http:// 12220 * U.K: 44 1483 401 700 * SAN 33 3 84 35 04 04 * Singapore: 65 287 8998 * Taiwan: 886 2698 0228 * http://www.pulseeng.com
G008.A (2/00)
6
GENERAL PURPOSE TRANSFORMERS
Control Transformers
Recognized component - Underwriter's Laboratories, Inc. High dielectric strength capability for industrial applications High ET - product allows long pulse width
Electrical Specifications @ 25C -- Operating Temperature 0C to 70C
Part Number PE-61001 PE-61003 PE-61006 PE-61007 PE-61008 PE-61014 PE-61015 PE-61017 PE-61018 PE-61019 PE-61023 Turns Ratio (10%) 1:1 2:1 1:1:1 1:1:1 1:1:1 1:1 1:1 2:1 2:1 1:1:1 2:1:1 Primary Sine Wave OCL (mH MIN) 1.0 0.2 0.2 1.0 5.0 1.0 5.0 1.0 5.0 0.2 1.0 Primary ET-Constant (V-s MIN) 360 180 180 360 866 700 1500 700 1500 290 700 PRI/SEC Cww (pF MAX) 30 24 30 36 42 36 42 36 42 34 40 PRI/SEC Leakage Inductance 15.0 5.0 5.0 12.0 80.0 26.0 130.0 24.0 125.0 4.7 27.0 Primary DCR ( MAX) 2.8 1.4 -- 2.8 6.0 3.0 6.3 3.0 6.3 1.4 3.0 Secondary DCR ( MAX) 3.1 0.9 1.5 3.6 7.2 3.2 7.0 2.0 4.0 1.5 2.0 Hi Pot* PRI/SEC (Vrms) 1600 1600 1600 1600 1600 2400 2400 2400 2400 2400 2400 Schematic/ Package Style A/TH11 A/TH11 B/TH11 B/TH11 B/TH11 A/TH12 A/TH12 A/TH12 A/TH12 B/TH12 B/TH12
*NOTE: PE-61001-PE-61023 Hi Pot SEC/SEC 300 Vrms. Average Power Rating: 2 Watts. UL-478 Recognized, File Number E52661.
Schematics
A
5
6
B
3
45
6
1 2 WINDING
2
1
2 3 WINDING
U.S: 858 674 8100 * U.K: 44 1483 401 700 * France: 33 3 84 35 04 04 * Singapore: 65 287 8998 * Taiwan: 886 2 2698 0228 * http://www.pulseeng.com
7
G008.A (2/00)
GENERAL PURPOSE TRANSFORMERS
Control Transformers
Mechanicals
TH11
2 WINDING .750 MAX 19,05 5 6 .400 10,16 .200 5,08 .600 15,24 BOTTOM VIEWS .500 MAX 12,70 .020 0,50
TH11 Except PE-61003 Weight ........... 8.6 grams ............................... 8.2 grams Tube ................... 25/tube ................................... 25/tube Dimensions: inches mm .010 Unless otherwise specified, all tolerances are 0,25
3 WINDING
.200 5,08
3 PE-XXXXX 4 .750 MAX 19,05 DATE CODE 1
CNTRY OF ORIGIN
2
.600 15,24
.500 MIN 12,70
TH12
2 WINDING 3 WINDING
5
6 .940 MAX 23,87
.600 10,16
.300 5,08 .300 5,08
3 PE-XXXXX 4 1
DATE CODE CNTRY OF ORIGIN
2 .500 12,70 BOTTOM VIEWS .500 12,70
.775 MAX 19,68
Part Number PE-61014
Weight (Grams) 16.9
Tube 20
.810 MAX 20,58 .020 MIN 0,50 .500 MIN 12,70
PE-61015 PE-61017 PE-61018 PE-61019 PE-61023 16.7 16.8 20 20 16.5 20
For More Information :
UNITED STATES (Worldwide)
12220 World Trade Drive San Diego, CA 92128 Quick-Facts: 619 674 9672 http://www.pulseeng.com TEL: 858 674 8100 FAX: 858 674 8262
Dimensions: inches mm Unless otherwise specified, all tolerances are .010 0,25
UNITED KINGDOM (Northern Europe)
1 & 2 Huxley Road The Surrey Research Park Guildford, Surrey GU2 5RE United Kingdom TEL: 44 1483 401700 FAX: 44 1483 401701
FRANCE (Southern Europe)
Zone Industrielle F-39270 Orgelet France TEL: 33 3 84 35 04 04 FAX: 33 3 84 25 46 41
SINGAPORE (Southern Asia)
150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 TEL: 65 287 8998 FAX: 65 280 0080
TAIWAN, R.O.C. (Northern Asia)
3F-4, No. 81, Sec. 1 HsinTai Wu Road Hsi-Chih, Taipei Hsien Taiwan, R.O.C. Tel: 886 2 2698 0228 FAX: 886 2 2698 0948
DISTRIBUTOR
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Printed12220 WORLD T2 E Pulse Engineering, Inc. on recycled paper. (c)2000, DRIVE, SAN DIEGO, CALIFORNIA 92128 * TEL 619-674-8100 * FAX 619-674-8262 * http://
G008.A (2/00)
8

▲Up To Search▲

Price & Availability of PE-5163X

	To Download PE-5163X Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .